Encouragement Card Hop

Hi Everyone!

Welcome to the Encouragement Card Hop! I hope you have been enjoying the hop so far!

I have created a one layer card using a masking technique I learned from Laura Gallimore (Crafty Not Shifty). Laura taught a class at Junkie Fest and this was one of my favorite tips I learned from her.

This is the card I made. You can watch the YouTube video by clicking here:

I started by stamping the flowers and the teacup on Gina K Masking Magic masking paper. The stamp set is by Hero Arts and it is called Teacup Flowers, I fussy cut them out and arranged them on my card panel. Once I found an arrangement I liked, I adhered them to the panel. This is now considered the back of the panel.

I then put my card panel in my MISTI with the back of the panel facing up. I grabbed the stamp for the front flowers, the pinky purple flower and the tallest red flower and placed the stamps on the masked images. I closed the MISTI lid and picked up the stamps. I flipped the panel over so that the masks were not visible, inked up my stamps and then stamped them on the front of the card using Gina K’s Black Amalgam ink. I grabbed the matching masks off of the back of the card and covered up the 2 stamped images on the front.

I put my card panel back in the MISTI with the masked side up and put the stamp for the dark and light pink flower with the yellow center on top off the mask. I picked the stamp up with my MISTI lid, flipped the card panel over so the masked images were in the back and stamped my image on the front. I peeled the mask off of the back and placed it over the image in the front. I did this until I had stamped all of the images and covered them with masks.

I took out my Catherine Pooler Fiesta Blue ink and ink blended over the masked images using a cheap-o Amazon make up brush. I then squirted some water on the card and blotted it up. I was now able to remove the masks.

I colored my image using Polychromos colored pencils. The reds were Madder, Dark Red and Deep Red. Pinks were Pink Madder Lake, Dark Flesh and Fuchsia. Purples were MIddle Purple Pink, Crimson, Light Red Violet and Violet. The greens were Grass Green, Pistachio Green, Permanent Green Olive and Deep Cobalt Green.

For the teacup, I used Light Cobalt Turquoise, Cobalt Green, Cobalt Turquoise and Hello Turquoise. I was not coloring to make it look realistic, I just wanted a bright and cheerful card.

I stamped my sentiment using a sentiment from Hero Arts Rose Stem stamp set.

I cut about 1/4 of an inch off the top and side so that I would have a slight frame created when I adhered my card panel to my card base. I finished the card off be attaching some Studio Katia Crystal Clear Confetti. I love how they pick up the colors in the card. That complete’s my card.

Please follow along the blog hop. You will meet some amazing crafters!

Next up is Marie Bingaman! Click here to view her card.Https://anothercardmakingblog.blogspot.com/2019/08/welcome-to-encouragement-hop.html

Enjoy the hop!


Floral Mix Watercolor

Hello friends!

Today I am sharing a card made with my Zig Clean Color Real Brush Markers.  I recently took Kathy Racoosins Daily Marker class at Junkie Fest and I tried out the technique she demonstrated with watercolor.  Guess what?  It works!  Yes it took repetition and yes, I left my watercolor bumper guards on (embossed stamp), but the technique works and I feel like I can attempt a watercolor with out embossing the image first.

I started by stamping Simon Says Stamps Floral Mix Background on Canson Watercolor Paper. I used Ink On 3 clear embossing ink and used Hero Arts Detail Gold embossing powder.


The background looks pink, but I was coloring out on the patio and our umbrella is red and it cast a pink hue on my panel.

I began with the roses. I used Wine Red – 24, Carmine Red – 22 and Light Carmine – 21. Once I had completed the roses, I started on the leaves. I used Olive Green – 43 and Light Green – 41 for all of the leaves. I then moved on to the sunflower. I used Light Brown – 061 on the petals, Mid Brown – 065 on the center and Dark Brown – 062 around the edges of the center.


For the Zinnia’s, I used Yellow – 50 and Bright Yellow – 52.  For the pink flower, I used Light Carmine – 21, Pale Rose – 230 and Light Pink – 26.  Finally, for the background, I used Cornflower Blue – 37.


I trimmed down the panel to 5.25 by 3.75 inches and mounted it on to Tonic Nuvo Cobalt Velour Mirror Card.  I love this paper! I then scribbled some more Cornflower Blue on some scrap watercolor paper and stamped my sentiment on it using Ink On 3 clear embossing ink and Hero Arts Detail Gold embossing powder.


I then added the sentiment to the card panel.  I attached my panel to a Catherine Pooler card base and my card was finished.

Thanks so much for stopping by.  See you soon!



Stay Cool!


Today I am sharing a card made using Catherine Pooler’s “I Scream You Scream” stamp set. It has this darling ice cream truck and accompanying treats.  I decided to start with the treats but will be coloring that truck in an aqua tone very soon.2BC59E4F-0746-426A-8B0A-96A5F1753840

I started by getting my MISTI set up with the 4 inch GinaK Wreath Builder. I cut a 4 inch by 5.5 inch card panel.  I put a small “x” in the upper right corner so I would remember to keep that corner in the wreath builder at all times.

I set the popsicle stamp where I wanted it and began stamping using Memento Tuxedo Black ink and rotating my card panel.  I then added the ice cream cone, the bomb pop, the watermelon treat (I have never seen one), the cherry and finally, the stars.


I colored the popsicle using V12, V15 and V17.  I colored the ice cream using YG06 and G45. For the cone, I used E50, E53 and E57. For the watermelon, I used R37, R32 and R30. For the rind I used YG17, YG00 and G14. For the cherries, I used R30 and R37.


For the blue section on the bomb pop, I used B12, B14 and B16.  For the white I used C1 and C00.  For the red I used R37, R32 and R30.  For the stars, I used V12, V15 and V17.

For the sentiment, I used V12 and colored a scrap of cardstock.  I cut it out using Hero Arts Infinity Dies Circles. I stamped the sentiment and colored in the Cool using V15. For the background, I outlined the images with C4.  I then went over the outline with C2 and colored over that with C00.


I colored the sentiment circle and all of the treats with clear Wink of Stella.  I adhered the card panel to a Catherine Pooler card base and my card was complete.

Thank you for stopping by.  I hope you enjoyed this summer treat card!




Welcome to June!

For todays card share, I created a dimensional card using Jane’s Doodles Plumeria stamp set. The Blooms are beautiful! To be honest, I never have seen Plumeria, so I had to look it up. It comes in so many colors, truly a gorgeous plant.

To start, I stamped the images with Ink on 3 fade out ink. My original plan was to do no line coloring on the images. I colored the images using my Copic markers. For the leaves, I used G14, YG17, G17. For the petals, I used RV21, RV10, RV69 and RV13 for the pink areas and Y11 and Y35 for the yellow areas.

Once I had everything colored, I decided to re-stamp the images with Ink on 3 clear embossing ink and heat embossed using Ranger Super Fine Detail Gold embossing powder. I fussy cut out the images.

For the background, I used Catherine Pooler inks. I used Sauna for the very center, then did a small ring of Shea Butter around that and finally, I used It’s A Girl around the edges. I splashed a little water on the card base and blotted off with a microfiber towel. I then cut the card base out using Spellbinders Venise Lace dies.

I attached the leaves and several flowers to my card base using Gina K Connect glue. I popped up the cluster of flowers using 3M Foam Tape. I adhered the card panel to a side fold A2 card base and just turned it sideways. I decided to add the Love sentiment from Simon Says Stamps Four Seasons stamp set.

This completes todays card share. I hope you enjoyed it.

See you soon!


Sweet Sunflowers


Today I decided to use colors I rarely use; yellow and green. I am using Catherine Pooler products today.

I started by schmearing CP Ink in Seafoam Green on a piece of inexpensive, A2 sized cardstock. The foam pad works so well, it only took 4 swipes to saturate the background.

I then took the Perfect Vine stencil and taped it to my card panel. I stenciled CP Ink in Sage over the stencil. These two greens work beautifully together! I let the panel dry, then cut it out using My Favorite Things Blueprint Sketch #27 die.

I colored the flowers using Copic markers Y19, Y08 and YR27 on the petals and YR27, E15 and E18 for the center. For the leaves, I used G14, G07 and G05.

For the sentiment, I schmeared Seafoam and Sauna ink on cardstock and used the “Sweet” die to cut out the sentiment. I layered the Sauna on top of the Seafoam.

I glued the leaves and one of the flowers on my panel and popped up the other two flowers. I glued my card panel onto an A2 side fold card. I then painted the flowers and sentiment with Wink of Stella clear glitter pen and added glossy accents on top of that.

Very simple card, but I love the results. Thanks for stopping by!


Rennie Roses

Hi everyone!

Today’s card project is a thank you card created by using the Rennie Roses stamp set from Altenew. 20 years ago, when I started scrapbooking, we called these cabbage roses. I loved them then and I love them now!

I started by stamping the images on some random 80lb white cardstock cut to A2 size. It is pretty low quality, but Altenew markers blend beautifully. I used Hero Arts black ink to stamp the images. I left the images in my MISTI. I came back after coloring them and used Hero Arts black embossing powder on them to add a little pop.

I did really basic coloring. I colored the entire floral portion of each flower using R206. I then used R400 for the darker shading and blended using R301. I colored these while sitting in the back yard and enjoyed every minute of it. It was 70 degrees that day and I had just gotten back from the Pinners Conference. It is snowing/sleeting and we have 40 MPH wind gusts. Gah! Moving on…I colored the leaves using G935, G825 and G915. I colored the leaves the same way, light to dark and blend with the medium shade. I then fussy cut out all of the images.

I grabbed another piece of 80lb cardstock and used Catherine Pooler’s Twighlight ink and lightly blended the background using a makeup brush from Amazon. I then stamped the sentiment on the card panel using Versafine black ink. I trimmed the panel down and attached it to a black card base.

I then glued down two of the roses and all of the leaves to the card panel. I popped up the front rose using 3M foam tape.

I added Nuvo Drops in Ebony Black for a finishing touch. I really like how this card turned out and it took about 45 minutes to create. If I had a plan, it would have gone faster.

Thanks so much for stopping by! Have an amazing week!


Finally Using My Altenew Markers

Hi Everyone!

Today I am sharing a card I made using a supply I have neglected…my Altenew Alcohol Markers.

With this being the first time I have colored a flower while using these markers, I thought it would be more difficult. These markers were wonderful to use and the colors blend beautifully!

I used Power Poppy by Marcella Hawley’s Dahlia XL Stamp set for this card. I really thought this would be practice, so I stamped the flower using Ink on 3’s Fade Out ink on Recollections 110lb card stock.

I colored the Dahlia using Altenew Alcohol Markers R437, R614, R603 and R601. I colored using the entire petal in the lightest color, then creating the shadows. I flicked lines on the petals as well just to have some faint striations.

For the leaves, I used G702, G554 and G715. I colored the entire leaf with the lightest color, flicked lines out from the center with the medium shade and did a similar technique for the darkest shade.

I cut the card panel out using the largest stitched rectangle die from Lawn Fawn. I cut the flower out and popped it up on foam tape to add a little dimension. For the sentiment, I used Versamark ink and Wow!Lime Rickey embossing powder.

I adhered my card panel to a top folding card base using my EZ Runner, which finished my card. I decided to keep it simple and not add additional embellishment, the flower is so beautifully drawn, it should stand alone.

Thanks so much for stopping by, I hope you enjoyed today’s card share!


Butterflies and Blue Skies

Hello everyone!

For today’s card, I made a CAS card for AAA Cards challenge. The theme was butterflies and blue skies. I think you can surmise where the title came from.

To get started, I took a 4.25 by 5.5 inch card base and stenciled it Using Honey Bee Stamps Outdoor Scene Builder stencils. I used the cloud stencil to create the background for my card. I used Catherine Pooler’s It’s A Boy ink to stencil the clouds.

I then took Flickering Butterfly circle Die by Simon Says Stamp and embossed the butterflies into my cloud card panel. I took an additional panel of 110lb cardstock and cut out the butterflies so that I could color them.

I used my Copics to color the butterflies. I used B12 and B23 for the blue butterflies, Y11 and Y08 for the yellow and RV10 and RV23 for the pink. I colored the wings and bodies in the lighter color and added accents with the darker color. I glued the colored butterflies on to my card panel.

I then added the sentiment. I stamped the “Hello” from the Simon Says Stamp Magnificent Magnolia stamp set using Catherine Pooler It’s a Boy ink.

To finish up, I trimmed around the panel so that there would be white borders around the card. I attached the panel to my card base and then added Nuvo Crystal Drops. I used Bubble Gum Pink, Duck Egg Blue and Dandelion Yellow drops. Of course, I smeared the pink drops. I cleaned up the smear as best I could and my card was complete.

You can watch a You Tube Video of me creating this card at Quiet Sister Creates You Tube Channel.

Thanks for stopping by. See you soon!


Hello Sweet Friend

Hello Friend 2Hi Everyone! Are we enjoying all of our severe weather and blizzards?  I am not!  The beauty of this is that it is April and the snow will melt soon.  The severe weather will continue on.

Here is a link to the You Tube Video I made for this card:


For today’s card, I made a clean and simple card for the AAA Cards card challenge. Clean and simple is a new concept for me, I love bold colors and I enjoy coloring and shading.  I must admit, I really enjoyed making this card!


I used a stamp set from Stamptember; Altenew’s Dainty Sprig.  While this set is not available any longer, Altenew has a similar sets available that will work just as well: Dainty Bouquet, Amazing You, Dotted Blooms and Flower Vine, just to name a few.

To start, I stamped the image with Versamark ink and heat embossed the sprig using Rangers Seafoam White embossing powder on black cardstock from Simon Says Stamp.  The black card panel is A2 sized.

I primed my Gansai Tambi Starry Colors with my Distress Sprayer and started painting the petals with Champagne Gold.  I did not paint the image all the way to the edges, I left a little black between the embossed line and the paint.  I painted the buds with the Blue Gold as well as the floral centers and the leaves with the White gold.  I came back in with the Red Gold paint to add some depth to the flower petals.

I then took a very small paintbrush and added dots all around the image using all of the colors listed above.Hello Friend 1

I heat embossed my sentiment with the Seafoam White embossing powder using Versamark ink.  I then trimmed a little off of my card panel so that I had a border around my panel when I attached it to my card base.

I attached my card to a white, A2 size card base using my EZ Runner tape runner and called the card complete.

Thanks for stopping by!  See you soon!




A Pair of Ericka’s Stamping Challenge

Hello all,

A couple of Eric/ka’s That I follow created a card challenge.  The first challenge is to make a card about coffee.  I have a couple of sets of coffee stamps, but I really like the sentiments in Catherine Pooler’s Perfect Blend stamp set.


I think the colors in this card are a new favorite color combo.

I started by stamping Versamark ink on a card panel and pouring Ranger Platinum Silver Embossing Powder over the background and heat embossing it.  I repeated this step two more times.


I then took out the stamp with two coffee beans and randomly stamped it all over the background with Versamark sticky ink.  I poured Rangers Rose Gold Embossing Powder over the stamped images and heat embossed those.  I love this embossing powder.  It is more of a bronze color than rose gold.  It is just beautiful.  I then stamped the single bean and heat embossed it with the same embossing powder.

I cut a frame out for my shaker using Lawn Fawns stitched rectangle dies.  I used the largest and the third largest to create the frame.  I then stamped Versamark sticky ink all over the frame and heat embossed it with the Rose Gold embossing powder.  I repeated this step one more time.


I stamped my coffee and sentiment images on Judikins Embossable Window Plastic with Stazon Midnight Blue ink.  I attached the plastic to my frame with double sided tape.  I then doubled up my foam tape and added it to my frame.

I added some bronze, gold and blue Recollections sequins to my card panel and then attached my frame to my card panel.  I took the entire piece and attached it to an A2 card base.

I some how managed to add a ding in my embossed frame so I added a blue sequin to cover it.  That finished off my card.

I hope you have an amazing week!